Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- project:cisco7960g:konfiguration [02.12.2012 13:34] – angelegt gonium
+++ project:cisco7960g:konfiguration [14.01.2013 15:56] (aktuell) – Externe Bearbeitung 127.0.0.1
@@ Zeile 318: / Zeile 318: @@
 # SIP Configuration Generic File (stop)
 </code>
+===== Schritt 2: Asterisk einrichten =====
+sip.conf
+  [general]
+  context=default                 ; Default context for incoming calls
+  				; If your Asterisk is connected to the Internet
+  				; and you have allowguest=yes
+  				; you want to check which services you offer everyone
+  				; out there, by enabling them in the default context (see below).
+  allowoverlap=no                 ; Disable overlap dialing support. (Default is yes)
+  udpbindaddr=0.0.0.0             ; IP address to bind UDP listen socket to (0.0.0.0 binds to all)
+  tcpenable=no                    ; Enable server for incoming TCP connections (default is no)
+  tcpbindaddr=0.0.0.0             ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces)
+  srvlookup=yes                   ; Enable DNS SRV lookups on outbound calls
+  				; Default value is 70
+  				; Default: 60
+  				; Default: 100
+  				; Default: 1
+  			        ; "user" portion of the URI in the From: header with this
+  			        ; value if no fromuser is set
+  			        ; Default: empty
+  [authentication]
+  [basic-options](!)                ; a template
+          dtmfmode=rfc2833
+          context=from-office
+          type=friend
+  [natted-phone](!,basic-options)   ; another template inheriting basic-options
+          nat=yes
+          directmedia=no
+          host=dynamic
+  [public-phone](!,basic-options)   ; another template inheriting basic-options
+          nat=no
+          directmedia=yes
+  [my-codecs](!)                    ; a template for my preferred codecs
+          disallow=all
+          allow=ilbc
+          allow=g729
+          allow=gsm
+          allow=g723
+          allow=ulaw
+  [ulaw-phone](!)                   ; and another one for ulaw-only
+          disallow=all
+          allow=ulaw
+  [7701]
+  type=friend
+  secret=7701
+  host=dynamic
+  [7702]
+  type=friend
+  secret=7702
+  host=dynamic
+extensions.conf
+  [general]
+  static=yes
+  autofallthrough=no
+  [default]
+  exten => 500,1,Ringing
+  exten => 500,n,Wait(1)
+  exten => 500,n,Answer
+  exten => 500,n,Wait(1)
+  exten => 500,n,Playback("/home/asterisk/ansage2")
+  exten => 500,n,Record("/tmp/fc/fullcircle%d:wav")
+  exten => 500,n,Hangup
+===== Tips & Tricks =====
+  * Telefon neustarten: <code>*6-Settings></code>
+  * Asterisk debugging:
+<code>
+*CLI> core set verbose 3
+Verbosity was 0 and is now 3
+*CLI> core set debug  3
+Core debug was 0 and is now 3
+</code>